Canning basics

If you have not done home canning before or it has been a while since you last canned food, please read... ( General Canning Information ) from the National Center for Home Preservation http://nchfp.uga.edu/how/general.html

I love canning! And because I love it I think you should all do it too.
I feel great when a shelf full of food in mason jars sits waiting to feed my family a good homemade meal. And the good part is we know what ingredients are in the jar unlike the can foods you get in a store.

Here are two reasons to start canning:

1. Preserved foods are the ultimate fast food. The labor is done upfront, then it’s ready in an instant when you need it.
2. Canning is a cost saving way of eating.
There’s no losing when you start canning.

Canning Dos

Do follow reputable canning recipes. Ball Complete Book of Home Preserving* is highly recommended. In our house its refer to as the kitchen Bible

Do research food preserving safety guidelines. In the US visit the National Center for Home Food Preservation and in Canada visit Health Canada’s Home Canning Safety.

Do invest in new canning jars, snap lids and rings.

Do start with small batch recipes.

Canning Don’ts

Don’t follow your grandmother’s recipe and her canning instructions, food preservation science has come a long way. If your grandmother is a current day canning master and studies food safety, then please ignore this part.

Don’t reuse snap lids. EVER!

Don’t reuse glass jars from spaghetti sauce, or any other commercial glass jar, for canning.

Canning is a fun way for family to spend time together, In our house everyone likes to help do the canning, There is a job for everyone, washing fresh fruits or vegetables, Cutting the meats, washing jars, heating the water, Even designing the labels for on the jar's.
(Always put a date on your jars so you know when you canned it, And list what's inside the jar. )
Most canned food is good for one year.

sweet preservation has some beautiful labels free to download ( Thank you sweet preservation )
http://sweetpreservation.com/labels-crafts

2013 marks the 100th anniversary of the first series of jars designed by Ball brothers, each jar intended to be better than the one before. 1913 saw the launch of the launch of the first true "Perfect Mason" jar. These limited edition jars are a celebration of the heritage featuring period-correct blue color and embossed logos on the front and back. These vintage-inspired jars maintain all of our modern standards for quality and reliability. Perfect for all of your home canning needs... or as a collectible item.

Recommended Canners

Equipment for heat-processing home-canned food is of two main types—boiling-water canners and pressure canners. Most are designed to hold seven quart jars or eight to nine pints. Small pressure canners hold four quart jars; some large pressure canners hold 18 pint jars in two layers, but hold only seven quart jars. Pressure saucepans with smaller volume capacities are not recommended for use in canning. Small capacity pressure canners are treated in a similar manner as standard larger canners, and should be vented using the typical venting procedures.

Low-acid foods must be processed in a pressure canner to be free of botulism risks. Although pressure canners may also be used for processing acid foods, boiling water canners are recommended for this purpose because they are faster. A pressure canner would require from 55 to 100 minutes to process a load of jars; while the total time for processing most acid foods in boiling water varies from 25 to 60 minutes. A boiling-water canner loaded with filled jars requires about 20 to 30 minutes of heating before its water begins to boil. A loaded pressure canner requires about 12 to 15 minutes of heating before it begins to vent; another 10 minutes to vent the canner; another 5 minutes to pressurize the canner; another 8 to 10 minutes to process the acid food; and, finally, another 20 to 60 minutes to cool the canner before removing jars.

Boiling-water canners      

These canners are made of aluminum or porcelain-covered steel. They have removable perforated racks and fitted lids. The canner must be deep enough so that at least 1 inch of briskly boiling water will be over the tops of jars during processing. Some boiling-water canners do not have flat bottoms. A flat bottom must be used on an electric range. Either a flat or ridged bottom can be used on a gas burner. To ensure uniform processing of all jars with an electric range, the canner should be no more than 4 inches wider in diameter than the element on which it is heated.

Using boiling-water canners

Follow these steps for successful boiling-water canning:

1. Before you start preparing your food, fill the canner halfway with clean water. This is approximately the level needed for a canner load of pint jars. For other sizes and numbers of jars, the amount of water in the canner will need to be adjusted so it will be 1 to 2 inches over the top of the filled jars.
2. Preheat water to 140°F for raw-packed foods and to 180°F for hot-packed foods. Food preparation can begin while this water is preheating.
3. Load filled jars, fitted with lids, into the canner rack and use the handles to lower the rack into the water; or fill the canner with the rack in the bottom, one jar at a time, using a jar lifter. When using a jar lifter, make sure it is securely positioned below the neck of the jar (below the screw band of the lid). Keep the jar upright at all times. Tilting the jar could cause food to spill into the sealing area of the lid.
4. Add more boiling water, if needed, so the water level is at least 1 inch above jar tops. For process times over 30 minutes, the water level should be at least 2 inches above the tops of the jars.
5. Turn heat to its highest position, cover the canner with its lid, and heat until the water in the canner boils vigorously.
6. Set a timer for the total minutes required for processing the food.
7. Keep the canner covered and maintain a boil throughout the process schedule. The heat setting may be lowered a little as long as a complete boil is maintained for the entire process time. If the water stops boiling at any time during the process, bring the water back to a vigorous boil and begin the timing of the process over, from the beginning.
8. Add more boiling water, if needed, to keep the water level above the jars.
9. When jars have been boiled for the recommended time, turn off the heat and remove the canner lid. Wait 5 minutes before removing jars.
10. Using a jar lifter, remove the jars and place them on a towel, leaving at least 1-inch spaces between the jars during cooling. Let jars sit undisturbed to cool at room temperature for 12 to 24 hours.

Pressure canners   

Pressure canners for use in the home have been extensively redesigned in recent years. Models made before the 1970's were heavy-walled kettles with clamp-on or turn-on lids. They were fitted with a dial gauge, a vent port in the form of a petcock or counterweight, and a safety fuse. Modern pressure canners are lightweight, thin-walled kettles; most have turn-on lids. They have a jar rack, gasket, dial or weighted gauge, an automatic vent/cover lock, a vent port (steam vent) to be closed with a counterweight or weighted gauge, and a safety fuse.

Pressure does not destroy microorganisms, but high temperatures applied for an adequate period of time do kill microorganisms. The success of destroying all microorganisms capable of growing in canned food is based on the temperature obtained in pure steam, free of air, at sea level. At sea level, a canner operated at a gauge pressure of 10.5 lbs provides an internal temperature of 240°F.

Two serious errors in temperatures obtained in pressure canners occur because:

	1.	Internal canner temperatures are lower at higher altitudes. To correct this error, canners must be operated at the increased pressures specified in this publication (USDA's Complete Guide to Home Canning) for appropriate altitude ranges.
	2.	Air trapped in a canner lowers the temperature obtained at 5, 10, or 15 pounds of pressure and results in under processing. The highest volume of air trapped in a canner occurs in processing raw-packed foods in dial-gauge canners. These canners do not vent air during processing. To be safe, all types of pressure canners must be vented 10 minutes before they are pressurized.

To vent a canner, leave the vent port uncovered on newer models or manually open petcocks on some older models. Heating the filled canner with its lid locked into place boils water and generates steam that escapes through the petcock or vent port. When steam first escapes, set a timer for 10 minutes. After venting 10 minutes, close the petcock or place the counterweight or weighted gauge over the vent port to pressurize the canner.

Weighted-gauge models exhaust tiny amounts of air and steam each time their gauge rocks or jiggles during processing. They control pressure precisely and need neither watching during processing nor checking for accuracy. The sound of the weight rocking or jiggling indicates that the canner is maintaining the recommended pressure. The single disadvantage of weighted-gauge canners is that they cannot correct precisely for higher altitudes. At altitudes above 1,000 feet, they must be operated at canner pressures of 10 instead of 5, or 15 instead of 10, PSI.

Check dial gauges for accuracy before use each year. Gauges that read high cause under-processing and may result in unsafe food. Low readings cause over-processing. Pressure adjustments can be made if the gauge reads up to 2 pounds high or low. Replace gauges that differ by more than 2 pounds. Every pound of pressure is very important to the temperature needed inside the canner for producing safe food, so accurate gauges and adjustments are essential when a gauge reads higher than it should. If a gauge is reading lower than it should, adjustments may be made to avoid over-processing, but are not essential to safety.  Gauges may be checked at many county Cooperative Extension offices or contact the pressure canner manufacturer for other options.

Handle canner lid gaskets carefully and clean them according to the manufacturer’s directions.  Nicked or dried gaskets will allow steam leaks during pressurization of canners. Keep gaskets clean between uses. Gaskets on older model canners may require a light coat of vegetable oil once per year. Gaskets on newer model canners are pre-lubricated and do not benefit from oiling. Check your canner’s instructions if there is doubt that the particular gasket you use has been pre-lubricated.

Lid safety fuses are thin metal inserts or rubber plugs designed to relieve excessive pressure from the canner. Do not pick at or scratch fuses while cleaning lids. Use only canners that have the Underwriter’s Laboratory (UL) approval to ensure their safety. Replacement gauges and other parts for canners are often available at stores offering canning equipment or from canner manufacturers. When ordering parts, give your canner model number and describe the parts needed.

Using pressure canners

Follow these steps for successful pressure canning:

1. Put 2 to 3 inches of hot water in the canner. Some specific products in this Guide require that you start with even more water in the canner. Always follow the directions with USDA processes for specific foods if they require more water added to the canner. Place filled jars on the rack, using a jar lifter. When using a jar lifter, make sure it is securely positioned below the neck of the jar (below the screw band of the lid). Keep the jar upright at all times. Tilting the jar could cause food to spill into the sealing are of the lid. Fasten canner lid securely.
2. Leave weight off vent port or open petcock. Heat at the highest setting until steam flows freely from the open petcock or vent port.
3. While maintaining the high heat setting, let the steam flow (exhaust) continuously for 10 minutes, and then place the weight on the vent port or close the petcock. The canner will pressurize during the next 3 to 5 minutes.
4. Start timing the process when the pressure reading on the dial gauge indicates that the recommended pressure has been reached, or when the weighted gauge begins to jiggle or rock as the canner manufacturer describes.
5. Regulate heat under the canner to maintain a steady pressure at or slightly above the correct gauge pressure. Quick and large pressure variations during processing may cause unnecessary liquid losses from jars. Follow the canner manufacturer’s directions for how a weighted gauge should indicate it is maintaining the desired pressure.
   
   IMPORTANT: If at any time pressure goes below the recommended amount, bring the canner back to pressure and begin the timing of the process over, from the beginning (using the total original process time). This is important for the safety of the food.
6. When the timed process is completed, turn off the heat, remove the canner from heat if possible, and let the canner depressurize. Do not force-cool the canner.  Forced cooling may result in unsafe food or food spoilage. Cooling the canner with cold running water or opening the vent port before the canner is fully depressurized will cause loss of liquid from jars and seal failures. Force-cooling may also warp the canner lid of older model canners, causing steam leaks. Depressurization of older models without dial gauges should be timed. Standard-size heavy-walled canners require about 30 minutes when loaded with pints and 45 minutes with quarts. Newer thin-walled canners cool more rapidly and are equipped with vent locks. These canners are depressurized when their vent lock piston drops to a normal position.
7. After the canner is depressurized, remove the weight from the vent port or open the petcock. Wait 10 minutes, unfasten the lid, and remove it carefully. Lift the lid away from you so that the steam does not burn your face.
8. Remove jars with a jar lifter, and place them on a towel, leaving at least 1-inch spaces between the jars during cooling. Let jars sit undisturbed to cool at room temperature for 12 to 24 hours.

Find Your Altitude

Usually, you can find your altitude at your local planning commission or zoning office, on a webpage about your town or city, or contact your local Cooperative Extension Office.  Here is an on-line tool:

US Geological Survey elevation search tool at http://geonames.usgs.gov/pls/gnispublic
A service of the U.S. Geological Survey, U.S. Dept. of the Interior.